Product Overview
Mugen Seiki H2008
The Mugen Seiki MRX6X 1/8 4WD Competition Nitro Car Kit is inspired and based off the products used by Mugen Seiki driver Shoki Takahata, to capture the 2019 IFMAR 1:8 On-Road World Championship hosted by Steel City R/C Speedway. The features of the MRX6X help improve steering, rear traction, drivetrain efficiency, and drivability, giving you what you need to make it to the top step of the podium.
NOTE: Engine, tuned pipe, electronics, wheels and tires shown in photos are for illustrative purposes only and are not included. See needed to complete list below for a full list of items required to complete the model.
MRX6X Features:
Updated Front Suspension Geometry: The redesigned front uprights and aluminum bearing holders give you more overall steering and have a more precise steering feel. The shape of the upper front arm also changed to accommodate the current bodies on the market. The front shock tower and lower shock mounts have updated geometry that increases steering in the middle to the exit of the turn.
Updated Rear Suspension Geometry: The redesigned rear upper A-arms and rear upper arm plate help improve rear traction.
0.8M Pinion & Spur Gear: The 0.8M pinion and spur gear will increase drivetrain efficiency. You'll notice increased acceleration and increased runtime.
Redesigned Roll Bar: This will allow quicker pit stops.
Updated Front Drive Shaft: The redesigned front drive shafts allow increase steering angles and more overall steering.
Updated Wheel Levers: The front wheel lever (H2231) and rear wheel lever (H2232) are included as standard equipment on the MRX6X and allow easier installing/removing of wheels.
MRX6X Update Parts:
H0272-B Front drive shaft
H2151-B Rear upper bulkhead
H2161L/R Front upright
H2162 Insert upright
H2163 Rear upper and lower arm
H2164 Rear upper arm plate
H2165L/R Front upper arm
H2166L/R Front lower shock mount
H2167 Roll over bar
H2233 Pinion 19T
H2235 Pinion 24T
H2238 Spur gear 61T
H2241 Spur gear 57T
H2516 Front shock tower
Needed to Complete:
Radio system (transmitter and receiver)
Personal transponder
Steering & throttle servos
.21 Rear Exhaust Engine
Pipe & Manifold
Starter box & starter box battery pack
Receiver battery pack w/150mm Lead
Glowplug igniter
Battery charger
1/8-scale bodyshell & Polycarbonate paint
Wheels & tires
Model R/C car fuel (nitromethane)
Tools
Requires assembly. Shown assembled, with equiment not included, for display purposes only.
The Mugen Seiki MRX6X 1/8 4WD Competition Nitro Car Kit is inspired and based off the products used by Mugen Seiki driver Shoki Takahata, to capture the 2019 IFMAR 1:8 On-Road World Championship hosted by Steel City R/C Speedway. The features of the MRX6X help improve steering, rear traction, drivetrain efficiency, and drivability, giving you what you need to make it to the top step of the podium.
NOTE: Engine, tuned pipe, electronics, wheels and tires shown in photos are for illustrative purposes only and are not included. See needed to complete list below for a full list of items required to complete the model.
MRX6X Features:
Updated Front Suspension Geometry: The redesigned front uprights and aluminum bearing holders give you more overall steering and have a more precise steering feel. The shape of the upper front arm also changed to accommodate the current bodies on the market. The front shock tower and lower shock mounts have updated geometry that increases steering in the middle to the exit of the turn.
Updated Rear Suspension Geometry: The redesigned rear upper A-arms and rear upper arm plate help improve rear traction.
0.8M Pinion & Spur Gear: The 0.8M pinion and spur gear will increase drivetrain efficiency. You'll notice increased acceleration and increased runtime.
Redesigned Roll Bar: This will allow quicker pit stops.
Updated Front Drive Shaft: The redesigned front drive shafts allow increase steering angles and more overall steering.
Updated Wheel Levers: The front wheel lever (H2231) and rear wheel lever (H2232) are included as standard equipment on the MRX6X and allow easier installing/removing of wheels.
MRX6X Update Parts:
H0272-B Front drive shaft
H2151-B Rear upper bulkhead
H2161L/R Front upright
H2162 Insert upright
H2163 Rear upper and lower arm
H2164 Rear upper arm plate
H2165L/R Front upper arm
H2166L/R Front lower shock mount
H2167 Roll over bar
H2233 Pinion 19T
H2235 Pinion 24T
H2238 Spur gear 61T
H2241 Spur gear 57T
H2516 Front shock tower
Needed to Complete:
Radio system (transmitter and receiver)
Personal transponder
Steering & throttle servos
.21 Rear Exhaust Engine
Pipe & Manifold
Starter box & starter box battery pack
Receiver battery pack w/150mm Lead
Glowplug igniter
Battery charger
1/8-scale bodyshell & Polycarbonate paint
Wheels & tires
Model R/C car fuel (nitromethane)
Tools
Requires assembly. Shown assembled, with equiment not included, for display purposes only.
